RNP Chapter 627
Chapter 627
The whole process was completed.
I don’t know how long it took…
Su Mo and the researchers were adhering to the attitude of striving for perfection.
They treated every link with strict and careful debugging, and never allowed even the slightest deviation.
After repeated confirmation and inspection, the huge number of 325,700 lithography machine parts finally completed the debugging work successfully.
Looking at the monitoring screen of the control system, after two simulated startup tests, all the parts showed perfect fit.
Su Mo, who was sitting in front of the operating table, couldn’t help but breathe a sigh of relief.
During the debugging process of the lithography machine, the mental state must be in a high tension for a long time.
This kind of work state that requires high concentration throughout the process and cannot be sloppy is very energy-consuming and physically demanding.
Anyway, Su Mo felt… this was much more tiring than the group pick.
Just like Su Mo, when he announced that the debugging of the lithography machine had been completely completed.
Hundreds of researchers at the scene were excited and excited, but they all collapsed on the ground.
After a short rest, Shi Yanzhou came over and asked excitedly:
“Director Su.”
“Have we really completed the debugging work?”
“Then can we officially start the machine and test the performance of this lithography machine?”
Under Shi Yanzhou’s expectant gaze, Su Mo nodded and said:
“Yes, Commander Shi.”
“All the installation and debugging work of this quantum lithography machine has been completed.”
“The next thing to do is to start the machine to produce chips to test whether this quantum lithography machine has been successfully developed!”
After hearing Su Mo’s words, Shi Yanzhou’s face flushed with excitement.
As the commander-in-chief of the Longguang project, he has been working hard during this period, and the pressure is so great that he has grown a head full of white hair in just one month, just to wait for this day to come!
“Then… Director Su.”
“When do we start the chip production experiment?”
Although Shi Yanzhou is the commander-in-chief of the project, he is in charge of all matters of the Longguang project.
But in fact, everything related to technical research and development must be decided by Su Mo.
This is like the difference between the commander and the political commissar. Although the daily administrative affairs are decided by the political commissar.
But in terms of war decision-making and command, everything must be obeyed by the command of the military commander in charge.
This is the specialization of the profession, mutual cooperation and cooperation to learn from each other’s strengths and weaknesses, but not interfering with each other.
“Now that everything is ready, the sooner the better.”
“After a short rest and adjustment, let’s start the production experiment.”
After hearing Su Mo’s words, Shi Yanzhou, who has always been vigorous and resolute, immediately nodded in agreement.
During this period of cooperation, Su Mo’s efficiency was very much to his liking.
Half an hour later…
With the last inspection before starting production.
After confirming that the 0.5-nanometer quantum lithography machine in front of them had no potential problems, all the personnel on site withdrew.
The heavy tempered glass door of the laboratory production workshop also began to move little by little.
Finally, under the gaze of everyone, it closed tightly together, completely isolating the production workshop from the outside world.
At this time, the quantum lithography machine chip production workshop has entered a fully automated unmanned state.
Su Mo suppressed his excitement and ordered with a serious face: “Start the dilution refrigerator.”
“Ding!”
After several scientific researchers pressed the switch of the dilution refrigerator.
Through the huge tempered glass in front of them, everyone immediately saw a stream of cold white mist gas, which began to spray out from all sides.
“Report!”
“Current temperature, minus 130 degrees!”
“Current temperature, minus 200 degrees!”
“Current temperature, minus 260 degrees!”
With reports coming one after another, in just twenty minutes.
The laboratory production workshop inside the tempered glass reached a terrifying minus 273.1 degrees Celsius, only 0.005 degrees Celsius higher than absolute zero.
This is also the main reason why the quantum lithography machine must be a fully enclosed environment during operation and no personnel are allowed to exist.
The terrifying low temperature of minus 273.1 degrees Celsius is absolutely a life forbidden zone for all carbon-based organisms, and it can freeze people to death in an instant!
But for the quantum lithography machine, only at this extremely low temperature,
In an environment, quantum materials can transmit current without resistance.
And reduce energy loss and heat generation, improve the performance and stability of quantum lithography machines.
In addition, in an ultra-low temperature environment, the thermal noise of quantum materials can be reduced, and the quality and sensitivity of signal transmission can be improved.
Ten minutes later…
Wait until all preparations are ready.
At this time, the researchers outside the tempered glass were so nervous that they dared not breathe.
Everyone’s eyes were like spotlights, tightly locked on Su Mo, as if to witness the arrival of a great moment!
Su Mo looked solemn and focused. He stretched out his right hand calmly and pressed the start button firmly.
In the laboratory production workshop, the huge and precise 0.5nm quantum lithography machine was instantly activated!
The dull sound full of mechanical texture rang out, as if it was as pleasant as the dragon’s roar from the abyss of science and technology!
Under the gaze of everyone who was so nervous that they trembled all over and their hearts were about to rise to their throats
After being activated, this 0.5nm quantum lithography machine started to operate normally.
After Su Mo entered the command to produce 0.5nm quantum chips on the console.
This quantum lithography machine immediately entered the assembly line-style fully automatic production mode.
First, the wafers that have been strictly screened and pre-processed are placed steadily on the workbench of the lithography machine by the robotic arm.
Then, the quantum light source system inside the lithography machine started immediately, emitting a beam of light of a specific wavelength, accurately irradiating the surface of the wafer.
Then, using advanced optical systems and 0.5 nanometer precision control.
This quantum lithography machine began to draw every line and every structure on the wafer with extremely strict precision…
See this scene.
Outside the production workshop, the scientific researchers who were staring at the large monitoring screen did not blink their eyes, and were so nervous that they dared not even breathe hard.
Because the process of quantum exposure is the most difficult step of the lithography machine!
It is equivalent to carving a city-sized line on a wafer the size of a fingernail!
Any slight deviation means that the chip manufacturing has failed.
It can be said that success or failure depends on this one move!
As long as this level can be passed smoothly, all the remaining steps are minor problems.
But if this step fails, it means… this 0.5nm quantum lithography machine has a serious problem!
When Shi Yanzhou, the general commander of the Longguang project, thought of this, his legs became weak with nervousness.
Even though he never believed in ghosts and gods, he couldn’t help but pray in his heart at this moment…